APEX LCR O Frequency Response

Frequency response above (click to enlarge). Responses were taken at 1 meter notice the 5 markers showing the 2.5+ - from 200hz to 20k
Impedance below (click to enlarge) easy 6 ohm load.APEX LCR O tuned to 24hz as shown on marker #1

APEX LCR O sealed cabinet impedance (below)

Off axis horizontal measurements are yellow (on axis) and light blue,dark blue,orange 15,30, and 45 degrees off axis.Scale readings is in 5db increments

Unsmoothed spectral decay with the complete crossover same parts sold in the kits

APEX LCR O tweeter spectral with crossover installed (below)

APEX LCR O midrange spectral with crossover installed (below)

APEX LCR O woofer spectral with crossover installed (below)

APEX LCR O horizontal off axis response with the mic moved toward the tweeter side of the cabinet when used as a vertical monitor.(below) If using the APEX LCR O as a monitor for best imaging place the tweeter to the center of the room for best imaging.

APEX LCR O horizontal off axis response with the mic moved toward the midrange side of the cabinet when used as a vertical monitor.(below)