APEX III 4 way speaker kit

Price: $2,299.99 USD (+ shipping $89.99 USD)

APEX III 4 way speaker kit
The biggest-sounding main channel speakers at even twice the price!
More low-end frequency response than ANY other front channel speaker in its price range, yet it retains vocal clarity, throws an ultra wide sound stage, and provides accurate, pin-point imaging with an overall smooth balance! With open mid-range and solid bass down to 26 Hz, the Apex III yields impressive dynamics with exceptional transparency and very good off-axis behavior. Matched with an Apex C center channel speaker, you can have what amounts to the ultimate front speaker set-up in your 2 channel or home theatre room!We feel we have put together the most complete speaker kit to date.You recieve a CD complete with veneering information, cabinet contruction photos including finishing information

:: 6- 4.5" XBL^2 drivers 4 with a coating on the drivers
:: 2- RAW RA104.5 ribbon tweeters
:: 8- SDX7 XBL^2 drivers
:: Solen (Mundorf) capacitors even the large capacitors ,no electric caps used in our APEX III
:: Foil 16g Inductors which are measured to matched pairs
:: Metal Oxide resistors
:: Sonicap Gen II Bypass capacitor placed on each capacitor value in the crossover.
:: Metal black terminal plates
:: High quality connectors
:: Silver coated Teflon wire
:: 100 screws
:: Poly damping material
:: Upgraded speaker spikes
:: Cardas Lead Free Silver Solder
:: Cabinet construction plans,PLUS A CD containing complete contruction photos of the cabinets along with the crossover layout plans, and photos.We have included on the CD information on how to apply veneer both paper backed veneer as well as real wood slices of veneer.And last complete finishing methods on how to finish your Apex III speakers
The kit is shipped with measured matching components

**Additional Product Information**

**Optional Add-Ons**

Mundorf M-Cap Supreme by-pass capacitors (+$149.98 USD)
*Add to your shopping cart on check out*
Mundorf  M-Cap Supreme bypass capacitors addition to your kit these features contribute to an outstanding sound performance in detail
Some speakers kits we sell have several by-pass capacitors per pair of speakers, price reflects the required amount of by-pass capacitors needed for the speakers you are customizing.

Apex III tweeter & midrange Sonicap upgrade (+$199.99 USD)
*Add to your shopping cart on check out*
 Upgrade your Apex III tweeter midrange capacitors from Solen or Erse capacitors to the Sonicap capacitors plus Mills resistors.The Sonicap will yield or exceed the performance found in the most prestigious of boutique caps, yet with a price conducive to that of "entry level".While capacitors suffer from more noise (high distortion) than most audio components, the Sonicap exhibits very low noise and parasitics.  The presentation is rich in harmonics, warm, without the slightest loss of detail retrieval!  As a matter of fact, the micro-dynamics of the Sonicap is unmatched by anything close to its price range.Many of the Sonicap capacitors are needed in some speakers due to large capacitor values used in some models.

Apex III tweeter & midrange & woofer Sonicap upgrade (+$345.00 USD)
*Add to your shopping cart on check out*
 Upgrade your Apex III tweeter,midrange & woofer capacitors from Solen or Erse capacitors to the Sonicap capacitors plus Mills resistors.The Sonicap will yield or exceed the performance found in the most prestigious of boutique caps, yet with a price conducive to that of "entry level".While capacitors suffer from more noise (high distortion) than most audio components, the Sonicap exhibits very low noise and parasitics.  The presentation is rich in harmonics, warm, without the slightest loss of detail retrieval!  As a matter of fact, the micro-dynamics of the Sonicap is unmatched by anything close to its price range.Many of the Sonicap capacitors are needed in some speakers due to large capacitor values used in some models.

WBT Connectors (+$300.00 USD)
*Add to your shopping cart on check out*
 Upgrade your terminals in our kits with a high Quality WBT Topline Fully Insulated Binding Post

Bi-wire Option (+$199.00 USD)
*Add to your shopping cart on check out*
Bi-wire Option, complete with RAW Acoustics binding posts (high quality solid hard copper with 24k gold-plated construction; accepts banana plugs, spades, 12 gauge wire, and terminal pins.) plus RAW Acoustics handcrafted jumper wires.
1) Click to see an image of the bi-wire
2) Click to see the bi-wire installed

Mundorf Supreme capacitors with Mills resistors upgrade (+$425.00 USD)
*Add to your shopping cart on check out*
Upgrade your capacitors from Mundorf M-Cap (Solen) to the Mundorf M-Cap Supreme capacitors plus Mills resistors.The Mundorf M-Cap Supreme capacitors upgrade are the best capacitors we offer for our kits.Many of the capacitors are needed in some speakers due to large capacitor values used in some models.

QED Silver Anniversary wire (+$175.00 USD)
*Add to your shopping cart on check out*
QED Silver anniversary wire to complete the internal wiring for your speaker kit.
quad bunches of silver plated oxygen free copper are formed into a Spiral lay and are clearly visible through the shimmer pearl white low density polyethylene jacket.

Mundorf M-Cap Supreme Silver/Oil by-pass capacitors (+$299.99 USD)
*Add to your shopping cart on check out*
Mundorf M-Cap Supreme Silver/Oil by-pass capacitors addition to your kit these features contribute to an even fuller and smoother tonal richness
Some speakers kits we sell have several by-pass capacitors per pair of speakers, price reflects the required amount of by-pass capacitors needed for the speakers you are customizing.

Crossover Assembly (+$149.00 USD)
*Add to your shopping cart on check out*
For those who do not feel they can assemble the crossovers we will assemble and wire the crossovers for you.
This only leaves mounting the crossover board inside the cabinet plus the connections to the drivers and terminals very simple.
(Labour only)

RAW Ice Acoustical 1" Foam (+$199.00 USD)
*Add to your shopping cart on check out*
RAW ICE Acoustical foam 1" thick
A simple acoustic material that does not effect the inside volume of a speaker.
Designed to absorb standing waves and internal reflections inside the speaker enclosure.
This product can be cut with a razor knife for easy installation into your speaker cabinet,the black facing we place to the cabinet wall with the solid foam open to the inside of the speaker cabinet.