Apex III 4 way Speakers

Price: $4,999.99 USD (+ shipping $299.00 USD)

The biggest-sounding main channel speakers at even twice the price!
More low-end frequency response than ANY other front channel speaker in its price range, yet it retains vocal clarity, throws an ultra wide sound stage, and provides accurate, pin-point imaging with an overall smooth balance! With open mid-range and solid bass down to 26 Hz, the Apex III yields impressive dynamics with exceptional transparency and very good off-axis behavior. Matched with an Apex C center channel speaker, you can have what amounts to the ultimate front speaker set-up in your 2 channel or home theatre room!
Now you can custom order your Apex III made to your expectations with options now added.

:: Midrange drivers treated with the EnABL process
:: RA104.5 Ribbon tweeter
:: Rear firing full range drivers for a adjustable midrange image
:: Solen capacitors with metal oxide resistors, silver wire, Foil 16g Inductors; all crossover parts are hand measured along with matching pairs.(upgrade to Sonicap capacitors see options)
:: Hand assembled crossover no PCB plastic boards used for our crossover boards
:: Sonicap Gen II by-pass capacitors on each capacitor value (upgrade to platinum Sonicap by-pass capacitors see options)
::  RAW ICE acoustic absorption/damping material installed
:: QED Silver Anniversary wire internal wiring connections
:: Cardas Lead Free Silver Solder (RoHS compliant)
:: Handcrafted cabinet construction
:: Finished with real wood veneers hand selected in matched pairs
:: Hand-rubbed lacquer finish applied to enclosure
:: Speaker spikes included

:: Frequency response from 26 Hz - 35kHz, F3 - 24Hz, F10 - 17hz
:: Sensitivity 88 db (1watt/1m)
:: Impedance: 8 ohms nominal
:: 50 watt - 250 watt amplifier power
:: 1.25" front CNC baffles with 3/4" cabinet contruction bracing every 6”
:: Dimensions: 54" high x 10" wide x 17.5" deep
:: Crating*** cost included (see below)

:: With high quality Gen II Sonicap by-pass capacitors used in the Apex III even the most discerning audiophile's taste for quality parts will be satisfied.(Upgrade to Sonicap Platinum Teflon by-pass caps)

:: The level of high quality components doesn't stop inside the Apex III enclosure. With Sound Fusion adjustable spikes as standard equipment, we have achieved an overall level of component quality on our Apex III worthy of speakers at twice the price.

:: We apply a labor-intensive, multi-layered (10 coats!) finish, hand-polished to a vivid sheen that brings out the most intricate details of our standard real wood veneers; assembled by hand, finished by hand, applied by hand > only the highest of quality control standards are maintained from start to finish.

:: E-mail us for information and quotes on other real wood and custom veneer options**

:: Shipping cost within Canada and the continental USA

** Please expect to allow extra time for custom-built speakers to be produced; contact us for lead-time information before ordering.

*** The complete weight of each Apex III is about 160 lbs. and therefore cannot be shipped using standard cardboard shipping containers.

Finishing Options

**Additional Product Information**

**Optional Add-Ons**

High gloss finish (+$700.00 USD)
*Add to your shopping cart on check out*
We apply a labor-intensive, multi-layered (10coats!) lacquer finish,cut and hand-polished to a vivid mirror high gloss sheen.

Sonicap Platinum by-pass capacitors (+$299.00 USD)
*Add to your shopping cart on check out*
Sonicap Platinum by-pass capacitors addition to your kit or assembled pair of speakers.
The Sonicap Platinum bypass capacitors represents the very finest in audio bypass capacitors! Details of the Sonicap Platinum bypass capacitors are very fast, but full and rich.The presentation is ultra smooth without loss of detail,focus,or dynamics.The Platinum bypass caps are the best we offer.
Some speakers we sell use up to 12 by-pass capacitors per pair of speakers, price reflects the required amount of by-pass capacitors needed for the speakers you are customizing.

Bi-wire Option (+$195.00 USD)
*Add to your shopping cart on check out*
Bi-wire Option, complete with RAW Acoustics binding posts (high quality solid hard copper with 24k gold-plated construction; accepts banana plugs, spades, 12 gauge wire, and terminal pins.) plus RAW Acoustics handcrafted jumper wires.
1) Click to see an image of the bi-wire
2) Click to see the bi-wire installed

WBT Connectors (+$300.00 USD)
*Add to your shopping cart on check out*
 Upgrade your terminals in our kits with a high Quality WBT Topline Fully Insulated Binding Post

WaveZorber II (+$195.00 USD)
*Add to your shopping cart on check out*
WaveZorber II (sold in set of 4) is an audiophile quality, adjustable 1/2" O-ringed solid brass spike, threaded into a precision Machined Acetal (Delrin®) Base. The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base and the spike. A rubber O-ring is fitted to the brass rod to ensure that spike stays adjusted correctly as well as to dampen vibrations.WaveZorber II Has all of the same features as the WaveZorber I but is designed to be mounted in a 1” dia X 1.25” deep cavity. The WaveZorber II is only 1 3/8” tall, from the mounting flange.Perfict for custom sub cabinets or custom speaker cabinets were added material in the bottom of the cabinet makes for a very stable spike.

The WaveZorber spike is adjustable up to 1/2" (1.3 cm) from 2 1/2”-3” tall. The brass spike, Delrin® base and the O-ring work in together to ensure complete elimination of vibration at any point of adjustment.
WaveZorber I, II can be used with the following items:
•   Turntables
•   CD Players
•   DVD Players
•   Pre-amplifiers
•   Amplifiers
•   Speakers
•   Any other audio or video component

Add the WaveZorber III for Hard flooring foot with a ball/socket design.

WaveZorber I and II comes as a set of four and includes the following:
1.   O-Ringed brass spike with Delrin®  base   4
2.   Die cut double sided 1/8" foam tape   4
3.   Self-tapping screws (1 extra)   13
4.   Stainless steel turning rod   1

WaveZorber III (+$123.00 USD)
*Add to your shopping cart on check out*
WaveZorber III (sold set of 4) Is a Hard flooring foot with a ball/socket design. WaveZorber III must be used with the WaveZorber I and II. It comes with a new brass rod with attached base with a large O-Ring to protect hard flooring and eliminate vibration.The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base WaveZorber I II.

WaveZorber I (+$195.00 USD)
*Add to your shopping cart on check out*
WaveZorber I (sold in set of 4) is an audiophile quality, adjustable 1/2" O-ringed solid brass spike, threaded into a precision Machined Acetal (Delrin®) Base. The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base and the spike. A rubber O-ring is fitted to the brass rod to ensure that spike stays adjusted correctly as well as to dampen vibrations.

The WaveZorber spike is adjustable up to 1/2" (1.3 cm) from 2 1/2”-3” tall. The brass spike, Delrin® base and the O-ring work in together to ensure complete elimination of vibration at any point of adjustment.

Add the WaveZorber III for Hard flooring foot with a ball/socket design.

WaveZorber I and II comes as a set of four and includes the following:
1.   O-Ringed brass spike with Delrin®  base   4
2.   Die cut double sided 1/8" foam tape   4
3.   Self-tapping screws (1 extra)   13
4.   Stainless steel turning rod   1

WaveZorber I kit (+$308.00 USD)
*Add to your shopping cart on check out*
WaveZorber I kit comes as a set of four and includes the following:
1.  WaveZorber I  O-Ringed brass spike with Delrin®  base   8
2.   WaveZorber III Hard flooring foot with a ball/socket design 8
3.  Die cut double sided 1/8" foam tape   8
4.  Self-tapping screws (1 extra)   26
5.  Stainless steel turning rod   1

Full set, includes 8 WaveZorber I spikes and 8 WaveZorber III hard floor foot
Speakers and kits (not inluding Apex C which include 4 of each) This WaveZorber kit completes your pair of speakers with both the WaveZorber I plus the WaveZorber III.