B3W 3way speaker kit

Price: $975.00 USD (+ shipping $99.00 USD)

The B3W speaker kit is our new smallest 3 way modular tower design, using only a small foot print these speakers require only a small area yet produce a very large sound stage.
Compact plus dynamic ,yet not over shadowed for it size the B3W
Sleek looking ,style with clean mids,highs lows tuned to 29hz...

B3W Speaker driver kit includes
:: 2- SDX 7 woofer XBL^2 drivers
:: 2- 4.5" mid range XBL^2 drivers
:: 2- dome tweeters
:: Air core 15 gauge Inductors (16g on the woofer)
:: Metal Oxide resistors
:: By-pass caps
:: 4 sets of speaker terminal posts (1 pair for each cabinet all holes are pre drilled)
:: 2- 2" flared ports
:: 16g wire
:: screws
:: RAW ICE Acoustic foam
:: 8-speaker spikes (4 for each base cabinet
:: 8 rubber pads to isolate vibration from the upper cabinet and the lower cabinet

Speaker cabinets (INCLUDED) finished in your choice of finish ready for you to cut the holes in the front baffles, assemble the crossovers.In a week end you will have a complete 3 way speaker without building any speaker cabinets.
:: 2- .25cft cabinets with magnetic grills (driver holes not cut, you cut the driver holes)
:: 2- 1cft cabinets with magnetic grills (driver hole and port hole not cut, you cut holes)
:: cabinet driver location plans, CD containing complete construction photos , with the crossover layout plans

:: Ported lower cabinet tuned to 27hz
:: Sensitivity 85 db (1watt/1m)
:: Impedance: 8 ohms nominal

Finishing Options

**Additional Product Information**

**Optional Add-Ons**

Sonicap Platinum by-pass capacitors (+$165.00 USD)
*Add to your shopping cart on check out*
Sonicap Platinum by-pass capacitors addition to your kit or assembled pair of speakers.
The Sonicap Platinum bypass capacitors represents the very finest in audio bypass capacitors! Details of the Sonicap Platinum bypass capacitors are very fast, but full and rich.The presentation is ultra smooth without loss of detail,focus,or dynamics.The Platinum bypass caps are the best we offer.
Some speakers we sell use up to 12 by-pass capacitors per pair of speakers, price reflects the required amount of by-pass capacitors needed for the speakers you are customizing.

B3W tweeter & midrange & woofer Sonicap upgrade (+$340.00 USD)
*Add to your shopping cart on check out*
 Upgrade your B3W tweeter,midrange & woofer capacitors from Solen or Erse capacitors to the Sonicap capacitors plus Mills resistors.The Sonicap will yield or exceed the performance found in the most prestigious of boutique caps, yet with a price conducive to that of "entry level".While capacitors suffer from more noise (high distortion) than most audio components, the Sonicap exhibits very low noise and parasitics.  The presentation is rich in harmonics, warm, without the slightest loss of detail retrieval!  As a matter of fact, the micro-dynamics of the Sonicap is unmatched by anything close to its price range.Many of the Sonicap capacitors are needed in some speakers due to large capacitor values used in some models.

B3W tweeter & midrange Sonicap upgrade (+$295.00 USD)
*Add to your shopping cart on check out*
 Upgrade your B3W tweeter midrange capacitors from Solen or Erse capacitors to the Sonicap capacitors plus Mills resistors.The Sonicap will yield or exceed the performance found in the most prestigious of boutique caps, yet with a price conducive to that of "entry level".While capacitors suffer from more noise (high distortion) than most audio components, the Sonicap exhibits very low noise and parasitics.  The presentation is rich in harmonics, warm, without the slightest loss of detail retrieval!  As a matter of fact, the micro-dynamics of the Sonicap is unmatched by anything close to its price range.Many of the Sonicap capacitors are needed in some speakers due to large capacitor values used in some models.

WaveZorber I (+$195.00 USD)
*Add to your shopping cart on check out*
WaveZorber I (sold in set of 4) is an audiophile quality, adjustable 1/2" O-ringed solid brass spike, threaded into a precision Machined Acetal (Delrin®) Base. The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base and the spike. A rubber O-ring is fitted to the brass rod to ensure that spike stays adjusted correctly as well as to dampen vibrations.

The WaveZorber spike is adjustable up to 1/2" (1.3 cm) from 2 1/2”-3” tall. The brass spike, Delrin® base and the O-ring work in together to ensure complete elimination of vibration at any point of adjustment.

Add the WaveZorber III for Hard flooring foot with a ball/socket design.

WaveZorber I and II comes as a set of four and includes the following:
1.   O-Ringed brass spike with Delrin®  base   4
2.   Die cut double sided 1/8" foam tape   4
3.   Self-tapping screws (1 extra)   13
4.   Stainless steel turning rod   1

WaveZorber II (+$195.00 USD)
*Add to your shopping cart on check out*
WaveZorber II (sold in set of 4) is an audiophile quality, adjustable 1/2" O-ringed solid brass spike, threaded into a precision Machined Acetal (Delrin®) Base. The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base and the spike. A rubber O-ring is fitted to the brass rod to ensure that spike stays adjusted correctly as well as to dampen vibrations.WaveZorber II Has all of the same features as the WaveZorber I but is designed to be mounted in a 1” dia X 1.25” deep cavity. The WaveZorber II is only 1 3/8” tall, from the mounting flange.Perfict for custom sub cabinets or custom speaker cabinets were added material in the bottom of the cabinet makes for a very stable spike.

The WaveZorber spike is adjustable up to 1/2" (1.3 cm) from 2 1/2”-3” tall. The brass spike, Delrin® base and the O-ring work in together to ensure complete elimination of vibration at any point of adjustment.
WaveZorber I, II can be used with the following items:
•   Turntables
•   CD Players
•   DVD Players
•   Pre-amplifiers
•   Amplifiers
•   Speakers
•   Any other audio or video component

Add the WaveZorber III for Hard flooring foot with a ball/socket design.

WaveZorber I and II comes as a set of four and includes the following:
1.   O-Ringed brass spike with Delrin®  base   4
2.   Die cut double sided 1/8" foam tape   4
3.   Self-tapping screws (1 extra)   13
4.   Stainless steel turning rod   1

WaveZorber III (+$123.00 USD)
*Add to your shopping cart on check out*
WaveZorber III (sold set of 4) Is a Hard flooring foot with a ball/socket design. WaveZorber III must be used with the WaveZorber I and II. It comes with a new brass rod with attached base with a large O-Ring to protect hard flooring and eliminate vibration.The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base WaveZorber I II.

WaveZorber I kit (+$308.00 USD)
*Add to your shopping cart on check out*
WaveZorber I kit comes as a set of four and includes the following:
1.  WaveZorber I  O-Ringed brass spike with Delrin®  base   8
2.   WaveZorber III Hard flooring foot with a ball/socket design 8
3.  Die cut double sided 1/8" foam tape   8
4.  Self-tapping screws (1 extra)   26
5.  Stainless steel turning rod   1

Full set, includes 8 WaveZorber I spikes and 8 WaveZorber III hard floor foot
Speakers and kits (not inluding Apex C which include 4 of each) This WaveZorber kit completes your pair of speakers with both the WaveZorber I plus the WaveZorber III.

QED Silver Anniversary wire (+$65.00 USD)
*Add to your shopping cart on check out*
QED Silver anniversary wire to complete the internal wiring for your speaker kit.

Crossover Assembly (+$149.00 USD)
*Add to your shopping cart on check out*
For those who do not feel they can assemble the crossovers we will assemble and wire the crossovers for you.
This only leaves mounting the crossover board inside the cabinet plus the connections to the drivers and terminals very simple.
(Labour only)