HT2i Bookshelf kit

Price: $399.99 USD (+ shipping $49.99 USD)

HT2i Speaker kit
Mid size is a sleek narrow monitor with style.
Sound quality not expected from a monitor of its size very large presence yet retaining a controlled strong midrange with vocal richness.New 2008 crossover for the HT2 now called the HT2i

HT2i kit includes
:: 4- 4.5" XBL^2 drivers
:: 2- RA104.5 ribbon tweeters
:: Solen (Mundorf) capacitors
:: 16 gauge air core Inductors
:: Metal Oxide resistors
:: 2-Terminal cups
:: 4 ports (2 long plus 2 short ports used to tune your HT2 speakers )
:: wire,screws including Poly damping material
:: Cardas Lead Free Silver Solder
:: cabinet construction plans, PLUS a CD containing complete contruction photos of the cabinets along with the crossover layout plans including photos of assembled crossovers.Additional veneering plus finishing information on the CD.
:: Build your own cabinets.Using our CNC pre machined front baffles (included) all driver holes pre cut, flush mounted with magnets installed for the magnetic grills which are not  included in the kit but can be added as a option.
:: Recommended cabinet dimensions
Sealed .4cft cabinet tuned to 90hz 17" X 7" X 10"
Ported .4cft cabinet tuned to 75hz 17" X 7" X 10"
Ported .5cft cabinet tuned to 60hz 17" X 7" X 11.875"
:: Sensitivity is 87 db (1watt/1m)
:: Recommended amplification 40-100 watts RMS
:: Impedance: 10 ohms nominal very easy load on any amplifier

**Additional Product Information**

**Optional Add-Ons**

RAW Ice Acoustical 1" Foam (+$65.00 USD)
*Add to your shopping cart on check out*
RAW ICE Acoustical foam 1" thick
A simple acoustic material that does not effect the inside volume of a speaker.
Designed to absorb standing waves and internal reflections inside the speaker enclosure.
This product can be cut with a razor knife for easy installation into your speaker cabinet,the black facing we place to the cabinet wall with the solid foam open to the inside of the speaker cabinet.

Bi-wire Option (+$195.00 USD)
*Add to your shopping cart on check out*
Bi-wire Option, complete with RAW Acoustics binding posts (high quality solid hard copper with 24k gold-plated construction; accepts banana plugs, spades, 12 gauge wire, and terminal pins.) plus RAW Acoustics handcrafted jumper wires.
1) Click to see an image of the bi-wire
2) Click to see the bi-wire installed

Mundorf M-Cap Supreme by-pass capacitors (+$59.98 USD)
*Add to your shopping cart on check out*
Mundorf  M-Cap Supreme bypass capacitors addition to your kit these features contribute to an outstanding sound performance in detail
Some speakers kits we sell have several by-pass capacitors per pair of speakers, price reflects the required amount of by-pass capacitors needed for the speakers you are customizing.

Mundorf Supreme capacitors with Mills resistors upgrade (+$235.00 USD)
*Add to your shopping cart on check out*
Upgrade your capacitors from Mundorf M-Cap (Solen) to the Mundorf M-Cap Supreme capacitors plus Mills resistors.The Mundorf M-Cap Supreme capacitors upgrade are the best capacitors we offer for our kits.Many of the capacitors are needed in some speakers due to large capacitor values used in some models.

WBT Connectors (+$100.00 USD)
*Add to your shopping cart on check out*
 Upgrade your terminals in our kits with a high Quality WBT Topline Fully Insulated Binding Post

QED Silver Anniversary wire (+$55.00 USD)
*Add to your shopping cart on check out*
QED Silver anniversary wire to complete the internal wiring for your speaker kit.
quad bunches of silver plated oxygen free copper are formed into a Spiral lay and are clearly visible through the shimmer pearl white low density polyethylene jacket.

Mundorf M-Cap Supreme Silver/Oil by-pass capacitors (+$159.99 USD)
*Add to your shopping cart on check out*
Mundorf M-Cap Supreme Silver/Oil by-pass capacitors addition to your kit these features contribute to an even fuller and smoother tonal richness
Some speakers kits we sell have several by-pass capacitors per pair of speakers, price reflects the required amount of by-pass capacitors needed for the speakers you are customizing.

Crossover Assembly (+$95.00 USD)
*Add to your shopping cart on check out*
For those who do not feel they can assemble the crossovers we will assemble and wire the crossovers for you.
This only leaves mounting the crossover board inside the cabinet plus the connections to the drivers and terminals very simple.
(Labour only)