HT3i 3way Tower kit , DIY Speaker Kits Canada & Customer Speaker Cabinets

The HT3i is our 3 way tower design, using only a small 7" (width) X 11" (depth) foot print these speakers require only a small area yet produce a very large sound stage.
With our new crossover designed by Danny Richie
Crossover info: The tweeter uses a 3rd order crossover blended to a Mid range 1st order crossed over at 2500Hz with a 2nd order network on the woofer.
Compact plus dynamic ,yet not over shadowed for it size the HT3 finished in our
Slim looking ,style with shocking mids,highs lows tuned to 29hz...

:: 2- RA104.5 ribbon tweeters

:: Solen capacitors, Solen capacitor with a Sonicap capacitor stack on the large midrange capacitors, Solen 16 gauge Inductors, Metal Oxide resistors, Sonicap Gen II By-pass caps

:: Terminal cups, assembled ports, wire, screws, Poly damping material
:: Standard speaker spikes

:: Cardas Lead Free Silver Solder
:: cabinet construction plans,CD containing complete contruction photos of the cabinets along with the crossover layout plans

:: Build your own cabinets.(BAFFLES are included AND GRILLS ARE NOT INCLUDED AS SHOWN)

:: Recommended cabinet dimensions:

Ported

cabinet tuned to 29hz 40" X 7" X 11"
:: Sensitivity 85 db (1watt/1m)
:: Impedance: 8 ohms nominal

**Additional Product Information**

**Optional Add-Ons**

Sonicap Platinum by-pass capacitors (+$165.00 USD)
*Add to your shopping cart on check out*
Sonicap Platinum by-pass capacitors addition to your kit or assembled pair of speakers.
The Sonicap Platinum bypass capacitors represents the very finest in audio bypass capacitors! Details of the Sonicap Platinum bypass capacitors are very fast, but full and rich.The presentation is ultra smooth without loss of detail,focus,or dynamics.The Platinum bypass caps are the best we offer.
Some speakers we sell use up to 12 by-pass capacitors per pair of speakers, price reflects the required amount of by-pass capacitors needed for the speakers you are customizing.

RAW Ice Acoustical 1" Foam (+$99.00 USD)
*Add to your shopping cart on check out*
RAW ICE Acoustical foam 1" thick
A simple acoustic material that does not effect the inside volume of a speaker.
Designed to absorb standing waves and internal reflections inside the speaker enclosure.
This product can be cut with a razor knife for easy installation into your speaker cabinet,the black facing we place to the cabinet wall with the solid foam open to the inside of the speaker cabinet.

Bi-wire Option (+$195.00 USD)
*Add to your shopping cart on check out*
Bi-wire Option, complete with RAW Acoustics binding posts (high quality solid hard copper with 24k gold-plated construction; accepts banana plugs, spades, 12 gauge wire, and terminal pins.) plus RAW Acoustics handcrafted jumper wires.
1) Click to see an image of the bi-wire
2) Click to see the bi-wire installed

Crossover Assembly (+$125.00 USD)
*Add to your shopping cart on check out*
For those who do not feel they can assemble the crossovers we will assemble and wire the crossovers for you.
This only leaves mounting the crossover board inside the cabinet plus the connections to the drivers and terminals very simple.
(Labour only)

QED Silver Anniversary wire (+$85.00 USD)
*Add to your shopping cart on check out*
QED Silver anniversary wire to complete the internal wiring for your speaker kit.

WBT Connectors (+$100.00 USD)
*Add to your shopping cart on check out*
Upgrade your terminals in our kits with a high Quality WBT Topline Fully Insulated Binding Post

WaveZorber I (+$195.00 USD)
*Add to your shopping cart on check out*
WaveZorber I (sold in set of 4) is an audiophile quality, adjustable 1/2" O-ringed solid brass spike, threaded into a precision Machined Acetal (Delrin®) Base. The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base and the spike. A rubber O-ring is fitted to the brass rod to ensure that spike stays adjusted correctly as well as to dampen vibrations.

The WaveZorber spike is adjustable up to 1/2" (1.3 cm) from 2 1/2”-3” tall. The brass spike, Delrin® base and the O-ring work in together to ensure complete elimination of vibration at any point of adjustment.

Add the WaveZorber III for Hard flooring foot with a ball/socket design.

WaveZorber I and II comes as a set of four and includes the following:
1.   O-Ringed brass spike with Delrin® base   4
2.   Die cut double sided 1/8" foam tape   4
3.   Self-tapping screws (1 extra)   13
4.   Stainless steel turning rod   1

WaveZorber II (+$195.00 USD)
*Add to your shopping cart on check out*
WaveZorber II (sold in set of 4) is an audiophile quality, adjustable 1/2" O-ringed solid brass spike, threaded into a precision Machined Acetal (Delrin®) Base. The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base and the spike. A rubber O-ring is fitted to the brass rod to ensure that spike stays adjusted correctly as well as to dampen vibrations.WaveZorber II Has all of the same features as the WaveZorber I but is designed to be mounted in a 1” dia X 1.25” deep cavity. The WaveZorber II is only 1 3/8” tall, from the mounting flange.Perfict for custom sub cabinets or custom speaker cabinets were added material in the bottom of the cabinet makes for a very stable spike.

The WaveZorber spike is adjustable up to 1/2" (1.3 cm) from 2 1/2”-3” tall. The brass spike, Delrin® base and the O-ring work in together to ensure complete elimination of vibration at any point of adjustment.
WaveZorber I, II can be used with the following items:
•   Turntables
•   CD Players
•   DVD Players
•   Pre-amplifiers
•   Amplifiers
•   Speakers
•   Any other audio or video component

Add the WaveZorber III for Hard flooring foot with a ball/socket design.

WaveZorber I and II comes as a set of four and includes the following:
1.   O-Ringed brass spike with Delrin® base   4
2.   Die cut double sided 1/8" foam tape   4
3.   Self-tapping screws (1 extra)   13
4.   Stainless steel turning rod   1

WaveZorber III (+$123.00 USD)
*Add to your shopping cart on check out*
WaveZorber III (sold set of 4) Is a Hard flooring foot with a ball/socket design. WaveZorber III must be used with the WaveZorber I and II. It comes with a new brass rod with attached base with a large O-Ring to protect hard flooring and eliminate vibration.The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base WaveZorber I II.

tweeter & midrange Sonicap upgrade (+$295.00 USD)
*Add to your shopping cart on check out*
Upgrade your HT3/HT3O/HT8/HT8O tweeter midrange capacitors from Solen or Erse capacitors to the Sonicap capacitors plus Mills resistors.The Sonicap will yield or exceed the performance found in the most prestigious of boutique caps, yet with a price conducive to that of "entry level".While capacitors suffer from more noise (high distortion) than most audio components, the Sonicap exhibits very low noise and parasitics. The presentation is rich in harmonics, warm, without the slightest loss of detail retrieval! As a matter of fact, the micro-dynamics of the Sonicap is unmatched by anything close to its price range.Many of the Sonicap capacitors are needed in some speakers due to large capacitor values used in some models.