HT8O 3way Tower kit

Price: $1,199.99 USD (+ shipping $85.00 USD)

HT8O Speaker kit (2008 OW4 Hiquphon Platinum dome tweeter)
 Slim look with a lifestyle to itself! Having the MTM with twin side firing 6.8"drivers tuned to 27hz makes in a slim floor stander very easy to place in any room at only 7" in width.Side loading the woofers you can control the low end frequency response by positioning them to a wall or away from a wall. Bonus no sub woofer will be needed for most applications.

With our new OW4 Hiquphon Platinum dome tweeter retaining the same crossover points as our popular HT8 with our ribbon tweeter.
The Slim high power handling floor stander......

HT8O speaker kit
:: 4- 4.5" XBL^2 drivers
:: 2- OW4 Hiquphon tweeter
:: 4- 6.8" CSS SDX7 XBL^2 drivers (photo shows Extremis woofers we now use the SDX7)
:: 4- 2" flared ports (assembled) or slot port can be made as a option
:: Solen capacitors even the large no electric caps used in our HT8O only Solen capacitors, Solen 16g Air core Inductors (Midrange and tweeter)which are measured to matched pairs, Metal Oxide resistors,Sonicap GenII bypass capacitors
:: RAW custom terminal cups,wire,screws,poly-fill damping material
:: Cardas Lead Free Silver Solder
:: cabinet construction plans,CD containing complete contruction photos of the cabinets along with the crossover layout plans
:: Dimensions: 46" X 7" X 15" cabinet tuned to 27hz.
The kit is shipped with measured matching components
* 2- CNC baffles (Magnetic grills for the MTM not included)
:: Sensitivity 87 db (1watt/1m)
:: Impedance: 8 ohms nominal
:: In room response 22-24hz

**Additional Product Information**

**Optional Add-Ons**

Crossover Assembly (+$129.00 USD)
*Add to your shopping cart on check out*
For those who do not feel they can assemble the crossovers we will assemble and wire the crossovers for you.
This only leaves mounting the crossover board inside the cabinet plus the connections to the drivers and terminals very simple.
(Labour only)

QED Silver Anniversary wire (+$125.00 USD)
*Add to your shopping cart on check out*
QED Silver anniversary wire to complete the internal wiring for your speaker kit.

RAW Ice Acoustical 1" Foam (+$175.00 USD)
*Add to your shopping cart on check out*
RAW ICE Acoustical foam 1" thick
A simple acoustic material that does not effect the inside volume of a speaker.
Designed to absorb standing waves and internal reflections inside the speaker enclosure.
This product can be cut with a razor knife for easy installation into your speaker cabinet,the black facing we place to the cabinet wall with the solid foam open to the inside of the speaker cabinet.

HT8/HT8O flat pack unassembled (+$595.00 USD)
*Add to your shopping cart on check out*
CNC machined HT8/HT8O unassembled cabinets, all the parts have been programmed in the CNC and cut for easy assembly of our largest 4 way speaker kit.Offering the flat packs made from .75" thick front baffles with all other pieces made from 3/4" MDF.These CNC flat packs come with all of the angles cut,speaker drivers all flush mounted ,terminal pates machined.This makes for easy contruction of our HT8/HT8O 3 way speaker.This pair of HT8/HT8O unassembled cabinets can be assembled with modest tools on a weekend.All you need are glue and clamps
Cost includes shipping when added with a HT8/HT8O kit

WaveZorber I (+$195.00 USD)
*Add to your shopping cart on check out*
WaveZorber I (sold in set of 4) is an audiophile quality, adjustable 1/2" O-ringed solid brass spike, threaded into a precision Machined Acetal (Delrin®) Base. The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base and the spike. A rubber O-ring is fitted to the brass rod to ensure that spike stays adjusted correctly as well as to dampen vibrations.

The WaveZorber spike is adjustable up to 1/2" (1.3 cm) from 2 1/2”-3” tall. The brass spike, Delrin® base and the O-ring work in together to ensure complete elimination of vibration at any point of adjustment.

Add the WaveZorber III for Hard flooring foot with a ball/socket design.

WaveZorber I and II comes as a set of four and includes the following:
1.   O-Ringed brass spike with Delrin®  base   4
2.   Die cut double sided 1/8" foam tape   4
3.   Self-tapping screws (1 extra)   13
4.   Stainless steel turning rod   1

Pure Sonicap stack midrange upgrade (+$245.00 USD)
*Add to your shopping cart on check out*
Add a Pure Sonicap stack midrange upgrade with a  Platinum bypass cap.
Note! The sample midrange stack is shown as other model capacitor stack values differ in value yet use use stacked capacitors with the single Platinum by-pass capacitor to equal the value for each midrange capacitor value.

Sonicap Platinum by-pass capacitors (+$165.00 USD)
*Add to your shopping cart on check out*
Sonicap Platinum by-pass capacitors addition to your kit or assembled pair of speakers.
The Sonicap Platinum bypass capacitors represents the very finest in audio bypass capacitors! Details of the Sonicap Platinum bypass capacitors are very fast, but full and rich.The presentation is ultra smooth without loss of detail,focus,or dynamics.The Platinum bypass caps are the best we offer.
Some speakers we sell use up to 12 by-pass capacitors per pair of speakers, price reflects the required amount of by-pass capacitors needed for the speakers you are customizing.

tweeter & midrange Sonicap upgrade (+$295.00 USD)
*Add to your shopping cart on check out*
 Upgrade your HT3/HT3O/HT8/HT8O tweeter midrange capacitors from Solen or Erse capacitors to the Sonicap capacitors plus Mills resistors.The Sonicap will yield or exceed the performance found in the most prestigious of boutique caps, yet with a price conducive to that of "entry level".While capacitors suffer from more noise (high distortion) than most audio components, the Sonicap exhibits very low noise and parasitics.  The presentation is rich in harmonics, warm, without the slightest loss of detail retrieval!  As a matter of fact, the micro-dynamics of the Sonicap is unmatched by anything close to its price range.Many of the Sonicap capacitors are needed in some speakers due to large capacitor values used in some models.