HT8i 3 way Tower Speakers

Price: $2,999.99 USD (+ shipping $245.00 USD)

HT8i Slim look with a lifestyle to itself! Having the MTM with twin side firing 6.8"drivers tuned to 27hz makes in a slim floor stander very easy to place in any room at only 7" in width.Side loading the woofers you can control the low end frequency response by positioning them to a wall or away from a wall. Bonus you will require no sub woofer for most applications.
Now you can custom order your HT8 made to your expectations with options now added.

HT8i Speaker specifications
::3 way bass-reflex design
::Parallel crossover network
::1 RA104.5 ribbon tweeter
::2 -4.5" (shielded) paper woofer with
copper phase plug and cast basket
::Twin- Side firing 6.8 driver tuned to 27hz
::Solen capacitors, pure Solen stacked caps even on the midrange(upgrade to Sonicap capacitors see options)
::Sonicap Gen II By-pass capacitors on each cap valve(upgrade to platinum Sonicap by-pass capacitors)
::Solen Inductors measured for matched pairs
::Cardas Lead Free Silver Solder
::QED Silver Anniversary wire used for all internal wiring
::Black Satin 1.25" thick bases
::Speaker spikes included (upgrade to VB8 see options)
::Magnetic grills for the front
::3/4" MDF sides/back,.75" bracing, top and 1.25" bottom plate
:: Finished with real wood veneer ,Magnetic grills
:: Bases come in satin black
:: Sensitivity 87 db (1watt/1m)
:: Impedance: 8 ohms nominal
:: Dimensions: 46" X 7" X 15"
cabinet tuned to 27hz.
:: In room response 22-24hz

:: We apply a labor-intensive, multi-layered (6 coats!) lacquer finish, hand-polished to a vivid  sheen that brings out the most intricate details of our standard real wood veneers; assembled by hand, finished by hand, applied by hand > only the highest of quality control standards are maintained from start to finish.

:: E-mail us for information and quotes on other real wood and custom veneer options**
:: Shipped in 2-wood crates total shipping weight 105 lbs each

** Please expect to allow extra time for custom-built speakers to be produced; contact us for lead-time information before ordering.

Finishing Options

**Additional Product Information**

**Optional Add-Ons**

QED Silver Anniversary wire (+$125.00 USD)
*Add to your shopping cart on check out*
QED Silver anniversary wire to complete the internal wiring for your speaker kit.

Bi-wire Option (+$195.00 USD)
*Add to your shopping cart on check out*
Bi-wire Option, complete with RAW Acoustics binding posts (high quality solid hard copper with 24k gold-plated construction; accepts banana plugs, spades, 12 gauge wire, and terminal pins.) plus RAW Acoustics handcrafted jumper wires.
1) Click to see an image of the bi-wire
2) Click to see the bi-wire installed

WBT Connectors (+$200.00 USD)
*Add to your shopping cart on check out*
 Upgrade your terminals in our kits with a high Quality WBT Topline Fully Insulated Binding Post

High gloss finish (+$475.00 USD)
*Add to your shopping cart on check out*
We apply a labor-intensive, multi-layered (10coats!) lacquer finish,cut and hand-polished to a vivid mirror high gloss sheen.

WaveZorber I (+$195.00 USD)
*Add to your shopping cart on check out*
WaveZorber I (sold in set of 4) is an audiophile quality, adjustable 1/2" O-ringed solid brass spike, threaded into a precision Machined Acetal (Delrin®) Base. The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base and the spike. A rubber O-ring is fitted to the brass rod to ensure that spike stays adjusted correctly as well as to dampen vibrations.

The WaveZorber spike is adjustable up to 1/2" (1.3 cm) from 2 1/2”-3” tall. The brass spike, Delrin® base and the O-ring work in together to ensure complete elimination of vibration at any point of adjustment.

Add the WaveZorber III for Hard flooring foot with a ball/socket design.

WaveZorber I and II comes as a set of four and includes the following:
1.   O-Ringed brass spike with Delrin®  base   4
2.   Die cut double sided 1/8" foam tape   4
3.   Self-tapping screws (1 extra)   13
4.   Stainless steel turning rod   1

WaveZorber II (+$195.00 USD)
*Add to your shopping cart on check out*
WaveZorber II (sold in set of 4) is an audiophile quality, adjustable 1/2" O-ringed solid brass spike, threaded into a precision Machined Acetal (Delrin®) Base. The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base and the spike. A rubber O-ring is fitted to the brass rod to ensure that spike stays adjusted correctly as well as to dampen vibrations.WaveZorber II Has all of the same features as the WaveZorber I but is designed to be mounted in a 1” dia X 1.25” deep cavity. The WaveZorber II is only 1 3/8” tall, from the mounting flange.Perfict for custom sub cabinets or custom speaker cabinets were added material in the bottom of the cabinet makes for a very stable spike.

The WaveZorber spike is adjustable up to 1/2" (1.3 cm) from 2 1/2”-3” tall. The brass spike, Delrin® base and the O-ring work in together to ensure complete elimination of vibration at any point of adjustment.
WaveZorber I, II can be used with the following items:
•   Turntables
•   CD Players
•   DVD Players
•   Pre-amplifiers
•   Amplifiers
•   Speakers
•   Any other audio or video component

Add the WaveZorber III for Hard flooring foot with a ball/socket design.

WaveZorber I and II comes as a set of four and includes the following:
1.   O-Ringed brass spike with Delrin®  base   4
2.   Die cut double sided 1/8" foam tape   4
3.   Self-tapping screws (1 extra)   13
4.   Stainless steel turning rod   1

WaveZorber III (+$123.00 USD)
*Add to your shopping cart on check out*
WaveZorber III (sold set of 4) Is a Hard flooring foot with a ball/socket design. WaveZorber III must be used with the WaveZorber I and II. It comes with a new brass rod with attached base with a large O-Ring to protect hard flooring and eliminate vibration.The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base WaveZorber I II.

Pure Sonicap stack midrange upgrade (+$245.00 USD)
*Add to your shopping cart on check out*
Add a Pure Sonicap stack midrange upgrade with a  Platinum bypass cap.
Note! The sample midrange stack is shown as other model capacitor stack values differ in value yet use use stacked capacitors with the single Platinum by-pass capacitor to equal the value for each midrange capacitor value.

Sonicap Platinum by-pass capacitors (+$165.00 USD)
*Add to your shopping cart on check out*
Sonicap Platinum by-pass capacitors addition to your kit or assembled pair of speakers.
The Sonicap Platinum bypass capacitors represents the very finest in audio bypass capacitors! Details of the Sonicap Platinum bypass capacitors are very fast, but full and rich.The presentation is ultra smooth without loss of detail,focus,or dynamics.The Platinum bypass caps are the best we offer.
Some speakers we sell use up to 12 by-pass capacitors per pair of speakers, price reflects the required amount of by-pass capacitors needed for the speakers you are customizing.

tweeter & midrange Sonicap upgrade (+$295.00 USD)
*Add to your shopping cart on check out*
 Upgrade your HT3/HT3O/HT8/HT8O tweeter midrange capacitors from Solen or Erse capacitors to the Sonicap capacitors plus Mills resistors.The Sonicap will yield or exceed the performance found in the most prestigious of boutique caps, yet with a price conducive to that of "entry level".While capacitors suffer from more noise (high distortion) than most audio components, the Sonicap exhibits very low noise and parasitics.  The presentation is rich in harmonics, warm, without the slightest loss of detail retrieval!  As a matter of fact, the micro-dynamics of the Sonicap is unmatched by anything close to its price range.Many of the Sonicap capacitors are needed in some speakers due to large capacitor values used in some models.