RA8 speaker kit

Price: $799.99 USD (+ shipping $59.00 USD)

RA8 Speaker kit !discontinued!
Array kit coming that will be released at RMAF.
8" wide 65" tall 14" depth.
Using M-130 drivers and the new RA104.5 ribbon.

RA8 kit includes
:: 16- M-130 drivers(4-16ohm for the MTM)
:: 2- RA104.5 ribbon tweeters
:: Erse capacitors, air core Inductors,Metal Oxide resistors
:: Terminal cups,ports,wire,screws,Poly damping material
:: Cardas Lead Free Silver Solder
:: cabinet construction plans,CD containing complete contruction photos of the cabinets along with the crossover layout plans
:: build your own cabinets.
:: Recommended cabinet dimensions
   8" wide 65" tall 14" depth

**Additional Product Information**

**Optional Add-Ons**

RAW Ice Acoustical 1" Foam (+$349.00 USD)
*Add to your shopping cart on check out*
RAW ICE Acoustical foam 1" thick
A simple acoustic material that does not effect the inside volume of a speaker.
Designed to absorb standing waves and internal reflections inside the speaker enclosure.
This product can be cut with a razor knife for easy installation into your speaker cabinet,the black facing we place to the cabinet wall with the solid foam open to the inside of the speaker cabinet.

Pure Sonicap stack midrange upgrade (+$245.00 USD)
*Add to your shopping cart on check out*
Add a Pure Sonicap stack midrange upgrade with a  Platinum bypass cap.
Note! The sample midrange stack is shown as other model capacitor stack values differ in value yet use use stacked capacitors with the single Platinum by-pass capacitor to equal the value for each midrange capacitor value.

WBT Connectors (+$100.00 USD)
*Add to your shopping cart on check out*
 Upgrade your terminals in our kits with a high Quality WBT Topline Fully Insulated Binding Post

WaveZorber II (+$195.00 USD)
*Add to your shopping cart on check out*
WaveZorber II (sold in set of 4) is an audiophile quality, adjustable 1/2" O-ringed solid brass spike, threaded into a precision Machined Acetal (Delrin®) Base. The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base and the spike. A rubber O-ring is fitted to the brass rod to ensure that spike stays adjusted correctly as well as to dampen vibrations.WaveZorber II Has all of the same features as the WaveZorber I but is designed to be mounted in a 1” dia X 1.25” deep cavity. The WaveZorber II is only 1 3/8” tall, from the mounting flange.Perfict for custom sub cabinets or custom speaker cabinets were added material in the bottom of the cabinet makes for a very stable spike.

The WaveZorber spike is adjustable up to 1/2" (1.3 cm) from 2 1/2”-3” tall. The brass spike, Delrin® base and the O-ring work in together to ensure complete elimination of vibration at any point of adjustment.
WaveZorber I, II can be used with the following items:
•   Turntables
•   CD Players
•   DVD Players
•   Pre-amplifiers
•   Amplifiers
•   Speakers
•   Any other audio or video component

Add the WaveZorber III for Hard flooring foot with a ball/socket design.

WaveZorber I and II comes as a set of four and includes the following:
1.   O-Ringed brass spike with Delrin®  base   4
2.   Die cut double sided 1/8" foam tape   4
3.   Self-tapping screws (1 extra)   13
4.   Stainless steel turning rod   1

WaveZorber I kit (+$308.00 USD)
*Add to your shopping cart on check out*
WaveZorber I kit comes as a set of four and includes the following:
1.  WaveZorber I  O-Ringed brass spike with Delrin®  base   8
2.   WaveZorber III Hard flooring foot with a ball/socket design 8
3.  Die cut double sided 1/8" foam tape   8
4.  Self-tapping screws (1 extra)   26
5.  Stainless steel turning rod   1

Full set, includes 8 WaveZorber I spikes and 8 WaveZorber III hard floor foot
Speakers and kits (not inluding Apex C which include 4 of each) This WaveZorber kit completes your pair of speakers with both the WaveZorber I plus the WaveZorber III.

Sonicap Platinum by-pass capacitors (+$240.00 USD)
*Add to your shopping cart on check out*
Sonicap Platinum by-pass capacitors addition to your kit or assembled pair of speakers.
The Sonicap Platinum bypass capacitors represents the very finest in audio bypass capacitors! Details of the Sonicap Platinum bypass capacitors are very fast, but full and rich.The presentation is ultra smooth without loss of detail,focus,or dynamics.The Platinum bypass caps are the best we offer.
Some speakers we sell use up to 12 by-pass capacitors per pair of speakers, price reflects the required amount of by-pass capacitors needed for the speakers you are customizing.

WaveZorber I (+$195.00 USD)
*Add to your shopping cart on check out*
WaveZorber I (sold in set of 4) is an audiophile quality, adjustable 1/2" O-ringed solid brass spike, threaded into a precision Machined Acetal (Delrin®) Base. The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base and the spike. A rubber O-ring is fitted to the brass rod to ensure that spike stays adjusted correctly as well as to dampen vibrations.

The WaveZorber spike is adjustable up to 1/2" (1.3 cm) from 2 1/2”-3” tall. The brass spike, Delrin® base and the O-ring work in together to ensure complete elimination of vibration at any point of adjustment.

Add the WaveZorber III for Hard flooring foot with a ball/socket design.

WaveZorber I and II comes as a set of four and includes the following:
1.   O-Ringed brass spike with Delrin®  base   4
2.   Die cut double sided 1/8" foam tape   4
3.   Self-tapping screws (1 extra)   13
4.   Stainless steel turning rod   1

QED Silver Anniversary wire (+$345.00 USD)
*Add to your shopping cart on check out*
QED Silver anniversary wire to complete the internal wiring for your speaker kit.

Bi-wire Option (+$299.00 USD)
*Add to your shopping cart on check out*
Bi-wire Option, complete with RAW Acoustics binding posts (high quality solid hard copper with 24k gold-plated construction; accepts banana plugs, spades, 12 gauge wire, and terminal pins.) plus RAW Acoustics handcrafted jumper wires.
1) Click to see an image of the bi-wire
2) Click to see the bi-wire installed

Crossover Assembly (+$149.00 USD)
*Add to your shopping cart on check out*
For those who do not feel they can assemble the crossovers we will assemble and wire the crossovers for you.
This only leaves mounting the crossover board inside the cabinet plus the connections to the drivers and terminals very simple.
(Labour only)